Firewall enable port

To allow incoming connections on port 5001/tcp and ensure the zone is set to public, follow these steps:

Step 1: Add Firewall Rule for Port 5001

Run the following command to allow traffic on port 5001/tcp:

sudo firewall-cmd --zone=public --add-port=5001/tcp --permanent

Step 2: Reload Firewalld to Apply Changes

After adding the rule, reload the firewall:

sudo firewall-cmd --reload

Step 3: Verify the Rule

Confirm that port 5001/tcp is allowed in the public zone:

sudo firewall-cmd --zone=public --list-ports

This will display all allowed ports, including 5001/tcp.

Once completed, the web UI application should be accessible. Let me know if you need any refinements! 🚀